Soft Starter with LCD Display RQ6000 22KW 30HP 45A 380V

$254.29 USD
Shipping fees will be calculated at checkout.
Quantity
Correct Model Selection for Your Project
Project & Ordering FAQs
Specification
  • Model: RQ6000-22KW
  • Current: 45A
  • Voltage: AC380V±15%
  • Dimension: 157*200*255MM
  • Gross Weight: 5KG
📄 Technical Support & Downloads

Product Description

The RQ6000-22KW is an online soft starter with LCD display for 380V three-phase induction motors, rated 45A. Built on power electronics and microprocessor control with SCR-based smooth acceleration, it replaces star-delta and auto-transformer starters — providing visual monitoring and comprehensive protection, with no external bypass contactor required.

Key Features

  • 3 start modes: Current-limit / Voltage-ramp / Kick-start ramp
  • 2 stop modes: Free stop / Soft stop (prevents water hammer)
  • Real-time 3-phase current display with independent calibration
  • Bilingual LCD (Chinese/English), stores last 12 fault records
  • Dual programmable relay outputs + 4-20mA analog output + RS485 Modbus RTU (standard)
  • No external bypass contactor needed — simplest wiring among all soft starter types

Applications

  • Pumps & Fans — smooth start reduces water hammer and belt/duct stress
  • Conveyors — gentle load engagement, less mechanical shock on belts and gearboxes
  • Compressors — controlled acceleration protects valves and reduces pressure spikes
  • Crushers & Mixers — handles high starting torque loads with kick-start ramp mode

Technical Parameters

Parameter Specification
Model RQ6000-22KW
Rated Power / Current 22kW (30HP) / 45A
Input Voltage AC380V ±15%, 50/60Hz
Applicable Motor Squirrel-cage induction motor
Start Modes Current-limit (50–600% adj.) / Voltage-ramp / Kick-start ramp
Stop Modes Free stop / Soft stop
Protection Rating IP20
Cooling Forced air (dual fan)
Communication RS485 Modbus RTU (standard)
Analog Output 4–20mA
Protections Phase loss, overload, overcurrent, over/under-voltage, 3-phase imbalance, underload, start timeout
Ambient Temp / Altitude -25°C~+40°C / ≤2000m
Starting Frequency ≤15 starts/hour

Selection Tip

Recommended soft starter power = Motor Power × Load Factor (Pump/Fan: 1.2, Conveyor: 1.3, Compressor: 1.5, Crusher/Mixer: 1.6). Not sure which factor applies? Use our Soft Starter Selection Calculator: https://www.softstarterpro.com/blogs/selection-tools/soft-starter-selection-guide

Cart

loading